User`s guide

34(59)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 A
365/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Proprietary service - Intrusion
Definition
The feature CN ’Intrusion’ is based on the internal
ASB 150 02 feature, see INTRUSION,
document 267/155 34-ASB 150 02 Uen.
Operation
If the desired proprietary CN destination is busy, a CN
user can request intrusion, by dialling the facility digit
defined for Intrusion or by pressing the appropriate soft
key .
Intrusion is accepted at the called user, if it permits an
intrusion request, otherwise the call is released.
Limitation
The operator is always allowed to initiate intrusion on a
CN destination while the extension needs to have a
separate permission ( command 0182 ).
Proprietary service -
Message waiting indication
Definition
The feature CN ’Message waiting indication’ is based
on the existing ’External voice mailbox’ feature,
( see VOICE MAILBOX, EXTERNAL,
document 521/155 34-ASB 150 02 Uen) with the
difference that the external voicemail system is not
connect to one’s own system, it is connected to an
ASB 501 node in the corporate network.
The usage of a centralised voice mailbox is based on
the proprietary CN services line identification and call
diversion.
Operation
Within a coporate network, the ASB150 02 user is
notified of a waiting message ( as far as UUS1 is
available ) on the programmed ‘external voice
message key’ and he/she can initiate a call to the
mailbox by pressing the key.
Capacity
It is possible to use the ‘message waiting indication’
feature for just one external voice mailbox system
which is connected to an CN ASB 501 node.