User`s guide

43(59)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 A
365/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
1915
Calling number allowed to network?
The command is used to define whether the calling
ASB-party’s line directory number is allowed to be sent
to the network.
Valid data: Yes/No
No
Calling ASB-party’s
directory number is not sent to the
network.
Ye s
Calling ASB-party’s directory
number is sent to the network.
Default data: No
1916
Overlap receiving of called party number
NOTE:This command is only applicable for the
T-interface.
The command is used to define the digit receiving
method for the current ISDN-link. It states whether all
incoming digits are included in the call-setup message
from the network or whether the digits are received in
separate messages from the network.
Valid data: Yes/No
No
No overlap digit receiving.
Overlap digit receiving procedure
is not used, all digits are included in
the call setup message
(en-block procedure).
Ye s
Overlap digit receiving.
Overlap digit receiving procedure is
used, digits are received in
separate messages from the
network.
Default data: No
1917
MCID subscribed?
NOTE:This command is only applicable for the
T-interface.
The command is used to define whether or not the
Malicious Call Identification facility is subscribed for
the current ISDN-link from the network operator. The
command states whether an MCID facility request is
allowed to be sent to the network. This is the case, if
the facility is subscribed.
Valid data: Yes/No
No
MCID facility is not subscribed
Ye s
MCID facility is subscribed
Default data: No