User`s guide

46(59)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 A
365/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Programming of the “Own location code”
5431
Create own location code
This command creates the location code of
ASB 150 02.
Valid data: 1 - 4 digits
Default data: ----
NOTE:One location code can be assigned to
more than one system.
5531
Delete own location code
This command deletes the location code of
ASB 150 02.
5631
Alter own location code
This command alters the location code of
ASB 150 02.
Programming of the Private Network Router (PNR)
5432
Create private network access number
In ASB 150 02, the private network router (PNR) is
intended to be an isolated routing mechanism which
will have the following main tasks:
• Routing based on dialled private network
access code.
• 3 alternative route selections in case of
busy trunks.
• Destination number conversion based on
chosen route.
This command will create a new private network
access code (PNAC).
The private network access code may be a network
location code (LOC) or a co-ordinated numbering plan
(CNP) directory number (node id). The PNAC must be
a non-conflicting existing directory number (see
command group 56).
Up to 1000 private network access numbers (1 - 4
digits, LOC or CNP number) can be programmed.
5532
Delete private network access number
This command deletes a new private network access
code (PNAC).
5632
Alter private network access number
This command alters a new private network access
code (PNAC).
Private Number Routing (PNR) paramaters