User`s guide

53(59)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 A
365/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Supplementary service UUS
2072
MD110 (ASB 501) Release version of CN
This command defines the Release version of
MD 110 connected to the corporate network. This is
necessary because of enhancements and changes in
the MD 110 proprietary UUS signalling protocol for
digital networking features.
NOTE:All nodes within the private network must be
configured to the same Release version, also if
there is no MD110 system included in the
network (e.g. only ASB 150 02 systems)!
Valid data: 0 BC 8
1 BC 9
2 BC 10/1
3 BC 10/2
Default data: 0 BC 8
1940
UUS services subscription
This command states which UUS (User-to-User
Signalling) services are subscribed at this interface.
Valid data: UUS service not subscribed
UUS service 1 subscribed
UUS service 1 and 2 subscribed
UUS service 1 and 3 subscribed
UUS service 1, 2 and 3 subscribed
Default data: T-interface:
UUS service not subscribed
Q-interface:
UUS services 1, 2 and 3
subscribed
1941
Request of UUS service 1
NOTE:This command is only applicable for the
T-interface.
This command states whether UUS (User-to-User
Signalling) service 1 is requested explicitly on this
interface. Explicit request means that the request is
included in the FACILITY (for some markets) IE
(Information Element) in the SETUP message.
Valid data: Yes/No
No
not requested (implicitly)
Ye s
explicitly requested
Default data: No
1942
UUI length service 1
This command states the maximal UUI (User-to-user
Information) length in UUS (User-to-User Signalling)
service 1 supported at this interface.
Valid data: 32, 128 octets
Default data: 128 octets
1943
UUI in ALERTING?
This command states whether or not it is allowed to
include UUI (User-to-User Information) in the
ALERTING message at this interface.
Valid data: No not allowed
Yes allowed
Default data: Yes