User`s guide

58(59)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 A
365/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Proprietary service - Rerouting
1110
1st choice CN reroute position
1111
2nd choice CN reroute position
1112
3rd choice CN reroute position
The command is used to determine the 1st / 2nd / 3rd
choice (of three possible) CN reroute positions for the
trunk.
The programmable number refers to one of three
system-defined central answer positions. The value of
the programmed reference number(s) defines also
how CN rerouting is handled:
• If no reference numbers are programmed at all
for a trunk this means “CN rerouting not allowed
or not available”.
• Programmed value 0 means that the
CN reroute destination number(s) are defined in
the gateway PBX from where the rerouting will
be executed.
• Programmed Valid data 1 - 3 mean that the sys-
tem defined central answer position numbers, in
accordance with commands 2077 - 2079, are
used for the CN rerouting.
Three attempts are allowed in order to reach one of
the 1st, 2nd and 3rd choice central answer positions.
Valid data: empty, 0, 1 - 3
Default data: empty
The order of priority for local and CN rerouting is:
a Local rerouting at day switched system
b 1st choice CN rerouting
c 2nd choice CN rerouting
d 3rd choice CN rerouting
e Local rerouting at night switched system
2077
1st central answer position
2078
2nd central answer position
2079
3rd central answer position
The command is used to determine the 1st / 2nd / 3rd
choice (of three possible) central answer position for
the system in a corporate network.
The programmable numbers can be either :
• CN reroute number (1-8 digits) when the answer
position is located in another PBX. The pro-
grammed number must be the complete unique
network number.
• Internal directory number (1-4 digits) when the
answer position is located within the PBX of
one‘s own. The call handling process will be the
same as for local rerouting.
Valid data: empty, 1 - 8
Default data: empty