User`s guide

7(38)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 F
380/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Night Switch
This function switches the whole system to the night
switch mode. The night switch mode routes all
incoming external calls to a defined night answering
position, e.g. an answering machine, and changes the
Trunk Call Discrimination table of all extensions.
If the lamp is on, night switch is active.
For more information,
see NIGHT SERVICE,
document 362/155 34-ASB 150 02 Uen.
Operator announcement
When playing the individual greeting announcement,
the Operator’s Console’s default value is "silence". As
soon as the announcement is finished, the Operator
gets a beep-tone as an indication.
The Operator may listen to the caller during the
greeting announcement, if this has been programmed
via RASC.
Incoming calls
Internal and external calls
A ringing signal indicates an incoming call.
OR (if programmed)
The Operator has speech connection with the caller
via the loudspeaker and microphone, or via the
handset / headset (if installed).
Night
Press to activate / deactivate
(pre-programmed)
Press
Lift the handset
Press to end the call
Clear