User`s guide

3(6)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
98-05-29 D
102/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
All individual abbreviated numbers can be deleted by
pressing the following key sequence:
Outgoing calls
Press " * * " and then a key from 0 to 9
The procedures are from " **0 " to " **9 ".
Free Line key is seized and associated lamp
flickers as confirmation
Stored number is transmitted
If the system telephone has a display, it will show
the stored number.
Capacity
Each abbreviated number can have 24 digits including
intermediate tones and trunk access number.
( Up to ASB 150 02 R9 each abbreviated number can
have 18 digits )
On the ECONOMYplus (DBC 211) and STANDARD
(DBC 212) Telephone the user has access to the
individual abbreviated numbers via programmable
keys as well as via the keypad.
Individual abbreviated number dialling via
a programmable key
The number of individual abbreviated numbers
depends on the number of common abbreviated
numbers and other programmable functions in the
system.
Maximum number of programmable keys with 2nd -
function:
BASIC DBC 210 = 0
ECONOMYplus DBC 211 = 4
STANDARD DBC 212 = 4
EXECUTIVE DBC 213 = 14
OPERATOR DBC 214 = 3
KEY PANEL = 17
Old telephones:
BASIC DBC 199 = 0
ECONOMY DBC 601 = 0
ECONOMY DBC 751 = 0
STANDARD DBC 631 = 10
STANDARD DBC 755 = 10
EXECUTIVE DBC 662 = 30
EXECUTIVE DBC 753 = 30
OPERATOR DBC 663 = 20
OPERATOR DBC 754 = 20
Individual abbreviated number dialling via
the key pad
Up to 10 individual abbreviated numbers per telephone
can be programmed ( " * * 0 " - " * * 9 " ).
Limitations
Individual abbreviated numbers are checked by the
traffic group matrix and are also subject to analysis by
the TCD-function.
Individual abbreviated number dialling via
the key pad
" * " and " # " cannot be included in the abbreviated
number via programming from the telephone, but only
via programming via RASC.
Press
5
1
# #