User`s guide

21(38)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 F
380/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Authority
A four-digit code for prevention of unauthorized use of
the phone can be used.
For more information, see AUTHORISATION CODE,
document 113/155 34-ASB 150 02 Uen.
ISDN Facilities
See ISDN FACILITIES,
document 268/155 34-ASB 150 02 Uen.
Capacity
A maximum of three Operator Consoles can be
connected to the system.
There is no restriction on the number of concurrently
queuing calls to Operators.
Only one call at a time can be presented or connected.
Limitations
The Operator can make own outgoing calls, even if an
incoming call has been presented.
Programmable Alternative Answer Position for the
Operator
This facility can only be used by the last active
Operator.
The alternative answering position and the offduty
state will be lost after a restart of the system. After
pressing the offduty key the Operator can change the
default answer position. If the default answer position
is not programmed via RASC, the display will show:
If a wrong answer position (e.g. a trunk number) is
entered, all incoming calls will be routed to the default
answer position programmed in RASC.
Programming
Adjustments
The following chapter explains how to configure the
personal settings of the Operator.
Setting of the console to meet the Operator’s
requirements
10 Feb 14:40 +15˚
ANSW.ADDR. ????
OFFDUTY ACTIVATED
C= 0 I= 0
directory redial temp prog
10 Feb 14:40 +15˚
Operator 200
C= 0 I= 0
directory redial prog
Press (see display)
prog
10 Feb 14:40 +15˚
PHONE PROGRAMMING
Operator 200
C= 0 I= 0
key short-no. settings ringing
Press (see display)
settings
10 Feb 14:40 +15˚
PHONE PROGRAMMING
Operator 200
C= 0 I= 0
answer extend signalling return