User`s guide

ManualsBrandsEricsson ManualsConsumer electronicsDialog 3146

651

652

653

654

655

656

657

658

659

660

26(38)

Datum/Date Rev

Dokumentnr/DocumentnrUppgjord/Prepared

Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference

99-07-15 F

380/155 34-ASB 150 02 Uen

FACILITY DESCRIPTION

Faktaansvarig - Subject responsible

4004

Random selection ?

Calls in the Operator queue can be presented in ﬁxed

or rotary order.

z Enter respective function:

Y = Rotary order (default value).

N = Fixed order (always selects

Operator 0, if free)

4005

Automatic answer supervision time

An Operator who is marked for automatic answer can

be assigned a supervision time that will automatically

mark the Operator absent if no key is pressed within

the programmed time. The connected party will be

disconnected

zz Enter necessary number of minutes 0-11.

If value = 0 is set, there will be no

supervision.

Default data = 11

Voice message to external caller

When there is a queue to the Operator, an external

caller can receive a recorded queue message.

4006

Queue announcement time

This command is used to state the time that is to

elapse before the caller receives the queue message.

zzz Enter number of seconds (0 - 255).

Default data = 0 (no queue message)

The time for "Delayed Automatic Answer" plus the

length of the "Voice Announcement" must not exceed

the time programmed for "Delay time for the voice an-

nouncement for busy" ! (Otherwise the announcement

of the Operator interrupts the trunk announcement.)

4007

Queue announcement reference

The queue message is recorded with the help of

command 4401.

Command 4007 combines a recorded message with

the function queue message.

For recording of voice messages,