User`s guide

27(38)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 F
380/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
The following commands are only accessible via
RASC:
4008
Calling of extension at incoming call
This command makes possible to determine what will
happen in the following traffic case:
There is an answered incoming call on the left side and
the Operator has called a free extension on the right
side. The Operator has not initiated ringing yet. At this
moment the extension ( on the right side ) lifts the
handset or answers in another way.
Alternatives:
0 = There will be a three-party connection between
the Operator and the left and right side parties.
1 = The extension will be parked by the Operator.
4009
Two external lines at Operator 3-party
This command specifies whether two external lines are
allowed in an Operator three party connection. The
term "external lines" includes all types of external
lines.
4010
Two PE-lines at Operator 3-party
This command specifies whether two public exchange
lines are allowed in an Operator three party
connection.
4011
Listening during the greeting announcement
This command states whether or not the Operator will
listen to the caller during the greeting announcement.
Default data: NO
(The Operator hears nothing
while the Operator greeting
announcement is played.)
4012
Sending a ready tone after announcement
This command states whether the Operator gets a
beep tone after the greeting announcement.
Default data:YES
(The Operator gets a beep-tone as soon
as the Operator announcem. is finished)
Program key for parking
One of the programmable keys is to be programmed
as Operator hold.
0301
Function of key
The key is used to park incoming, non-extended calls
xxxx Enter the Operator's individual
directory number
yy Press the respective key (00 - 19)
zz Enter function code = 33
For the programming of functions on other
programmable keys, see the facility description for the
respective function.
Equipment
Operator’s Console:
• DBC 214 with up to 4 key panels
• DBC 663
• DBC 754
Note: Every Operator’s Console must always be
connected to the FIRST position of the ELU-D
(ELU-C)!
If voice answer for queue and/or greeting
announcement is required, the PBX shall possess at
least one VMU-D / -HD board.
10 Jul 14:40 +15˚
FUNCTION OF KEY 0301 xxxx yy zz
backward forward c/i return