User`s guide

37(38)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 F
380/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Equipment
Operator’s Telephone
The Operator Suite could be used in combination with
one of the following digital telephone sets:
• Economy telephone:
DBC 211, DBC 201, DBC 751, DBC 601
• Standard telephone:
DBC 212, DBC 202, DBC 755, DBC 631
• Executive telephone:
DBC 213, DBC 203, DBC 753, DBC 662
• Operator Console:
DBC 214, DBC 663, DBC 754
• Note: Every Operator Console must always be
connected to the FIRST postition of the ELU-D
(ELU-C) or MFU
ASB 150 02 system software R10 or higher and one
free V.24 port on the CPU-D_4 board are required.
Protection Unit
An adaptation unit (also known as WIBU-dongle) is
required for every software release. This determines
the number of agents supported by the system
according to the structure of the product. For a detailed
description of the adaptation unit handling please
refere to the Technical Guide of OPS. You will find
there very important notes concerning protection
philosophy of OPS.
Connection to the ASB 150 02
The following hardware is required for connection of
the OPS to the ASB 1500 02.
• V.24 cable to connect ASB 150 02 and the
Server PC
For detailed information about the connection to the
ASB 150 02, see document START OF OPERATION
(2/1537-ASB 150 02 Uen).
For detailed information about the installation of the
software, see OPS Technical Guide.
Hardware Requirements
OPS Server:
Pentium 133 MHz Windows NT compatible PC
64 MB RAM
Network Interface Card
500 MB of free hard-disk storage
1 free serial port (BusinessLink NT)
1 free parallel port (security device)
CD-ROM drive for software installation
OPS Clients:
Pentium 100 MHz Windows NT compatible PC
Monitor with 800 x 600 resolution
32 MB RAM
50 MB of free hard disk space
Network Interface Card
Communication:
TCP/IP protocol
NetBEUI protocol
Note: These are only minimum hardware
requirements for OPS application. If other applications
are also running on the same PC, a higher grade
machine will be required.
Software Requirements
OPS Server:
Microsoft Windows NT version 4.0
Microsoft Windows NT - SQL Server 6.5 or
Micorsoft Windows NT - SQL Workstation
BusinessLink 32-bit Client DLL
OPS Clients:
Windows NT version 4.0
BusinessLink 32-bit Client DLL
Documentation
The documentation will be delivered on the product
CD-ROM in Adobe PDF (printable document format) in