User`s guide

2(6)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
98-01-27 B
400/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Activation of paging on no reply
• On no reply, pager dials relevant postdialling digit
(normally 7) in order to activate paging.
From analogue telephone
• Press R-button and 7
• Ongoing call is disconnected whereafter call to
paging equipment takes place
• If pagee has display receiver, pager will hear ver-
ification tone when paging message has been
sent
Pager can now replace handset.
• If pager has bleeper, pager hears ring control
tone until pagee answers.
Answer
The answering procedure varies, dependent on the
type of paging receiver
Display receiver
For internal paging the following applies:
• Pagee dials digits shown on receiver display.
Call is connected to pager
For paging externally the following applies:
• Pagee dials digits shown on receiver display.
Pagee is connected to the external pager
Bleeper
• Pagee dials selected digit for answer of paging
call
• Pagee dials own directory number
• If pager has not gone on-hook, he/she receives
a tone burst, whereafter speech connection is
established.
If the pager has gone on-hook, he/she will be
rung as for a normal incoming call
Diversion to paging function
• An extension user can connect himself to the
paging number via follow-me or diversion
procedure.
For diversion, the call number is inserted as di-
vertee position
Procedure for follow me:
Dial *21*(call number) #
Mode digits
If the paging equipment accepts mode digits for
different types of paging, these digits can be sent by
ASB 150 02.
If the pager wishes to select the mode digit
her-/himself, the call must be made using the number
for alternative paging.
See below.
Speech possibility
Some paging units allow a spoken message to be sent
to the pagee.
If paging with speech possibility is utilised, this is
indicated by the mode digit.
The time allowed for a spoken message is limited, as
the paging channel is occupied during this period.
The permitted time is stated via command.
Alternative paging
By dialling the digit for alternative paging, the pager
can her-/himself choose between two types of paging:
• Display message = mode digit 5
• Loudspeaker paging = mode digit 6
Call code * Mode digit * Paged extension * (message if
any) #