User`s guide

3(6)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
98-01-27 B
400/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
The display shows for example:
EXECUTIVE Telephone
STANDARD Telephone
Capacity
A maximum of 250 paging numbers are permitted.
Of these numbers up to 50 can be temporary numbers
utilised for example by visitors.
The maximum permitted number of unanswered meet-
me calls is 25.
The number of concurrently ongoing paging calls in
the system is dependent on the number of connected
paging channels.
Each paging channel in the paging equipment requires
an analogue trunk in ASB 150 02.
Limitations
Paging is possible in one paging sector only.
Each extension can make one paging call at a time.
If there is no free paging channel congestion tone will
be received.
Programming
Programming a selected trunk line
The trunk line or trunk lines selected for connection to
the paging facility needs to be programmed for this.
See also TRUNK,
document 486/155 34-ASB 150 02 Uen.
If several lines are connected these are placed in one
route. See also ROUTE SELECTION,
document 444/155 34-ASB 150 02 Uen.
3201
Route member's dir no.
This command states which trunks are to belong to a
route as well as the position of the trunk within the
route.
The selected trunk line must also be removed from the
existing route.
8105
Paging channel
The paging equipment is connected to ASB150 via
one or more trunks, depending on how many channels
are desired.
If several channels shall exist, these trunks must be
placed in one route.
This command is used to determine the channel
number, i.e. the call number of the paging equipment.
The number shall be either the directory number of the
trunk or route, depending on whether one or several
channels shall exist.
The stated channel number must exist in the system.
When paging is initiated, paging code, mode digit/
message (if used) are sent to the paging equipment
via the paging channel stated in this command.
10 Jul 14:40 +15˚
11*6*202*12345#
10 Jul 14:40 +15˚
11*6*202*12345#