User`s guide

5(6)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
98-01-27 B
400/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Defining paging functions
8101
Number of digits in paging code
The number of digits in the receiver number that is
demanded by the paging equipment is stated here.
8102
Number of digits to be shown on display
If the receiver has a display the number of digits to be
transmitted to the receiver shall be stated here.
8104 Paging absence ?
Whether the paging equipment can send an signal that
e.g. the receiver is in its charging compartment is to
be stated here
*8106 Display string
Whether any special digits are to be displayed on the
pagee's display when the call is external is stated here.
If no digits are stated the answer digit plus display will
be shown.
8107
End of paging number
Whether the end character (#) shall be sent for DTMF-
signalling to the paging equipment is stated here.
8108
Max paging speech time
If the receiver permits voice paging, the maximum time
for speaking with the pagee is stated here.
Initial value = 10s
8109
Paging meet-me time
The time at the disposal of the pagee before the
paging call is cleared down. Initial value = 60s
8110
Paging progress time
The time that the connection to the paging equipment
shall remain in order to guarantee paging is stated
here. If the paging equipment supplies a verification
signal clear down ensues automatically
Initial value = 5s
8103
Mode digits
If a mode digit can be sent to the receiver, whether this
digit shall be placed before or after the paging code
shall be stated here.
8112-8118
Mode digits
If the connected paging equipment can accept mode
digits these can be altered with the help of commands
8112-8118. If no mode digit is desired this is written
over with the help of the space-key.
Programming of paging receiver
8201
State receiver's directory number
This command is used to connect the extension's
(pagee's) directory number to the pager's number
xxxx Enter receiver's number (1 - 250)
zzzz Enter extension's (pagee's) directory
number
10 Jul 14:40 +15˚
PAGING RECEIVER DIR 8201 xxxx zzzz
backward forward c/i return