User`s guide

2(2)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
97-10-31 B
403/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Programming
0301
Program function
An external line key needs to be programmed for the
trunk.
xxxx Enter extension's directory number
(1 - 4 digits)
yy Enter relevant key (00 - 48)
zz Enter function code = 12
Step to command 0302.
0302
Program trunk line number
zzzz Enter directory number of trunk
Step to command 0303.
0303
Program ring type
z Enter type of ring signal (0 - 4)
The external line key can also be programmed via
individual programming.
See document FACILITY DESCRIPTION - GENERAL
(155 34-ASB 150 02 Uen).
Following command is only accessable via RASC:
3201
Route member's dir no
This command states which trunks are to belong to a
route as well as the position of the trunk within the
route. A trunk is removed from a route by erasing the
value of the relevant directory number.
Before this command can be executed, the command
for creating route access codes (5401) must have
been executed.
On insertion of a trunk in a route the trunk has to be
erased from its existing route (if one exists). This is of
particular importance during installation when trunk
700 will automatically be assigned to the route with call
number 0.
Equipment
None.
10 Jul 14:40 +15˚
FUNCTION OF KEY 0301 xxxx yy zz
backward forward c/i return
10 Jul 14:40 +15˚
ASSOCIATED NUMBER 0302 xxxx yy zzzz
backward forward c/i return
10 Jul 14:40 +15˚
RINGING ALTERNATIVE 0303 xxxx yy z
backward forward c/i return