User`s guide

2(10)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
98-05-29 D
480/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
In principle the TANDEM unit works as follows:
•forincoming calls, both telephones will be trea-
ted as 1 single extension.
•foroutgoing calls, both telephones will be treated
as 2 seperate extensions.
Important note:
Be sure always to create/change/delete the Slave
directory number in RASC AND in the Cordless System
Manager, especially when reconfiguring ASB 150 02.
There are two kind of TANDEM configurations
Slave permanently logged on
Slave temporary logged on
Slave permantently logged on
Via system command it is possible to define that the
slave is permanently logged on.
(See chapter "Programming" in this document).
Incoming calls are always indicated on both
telephones, the master ond the slave telephone.
Slave temporary logged on
The user of the TANDEM unit has the possibility to
decide, whether incoming calls are presented only on
the master (= slave logged off) or on both telephones
(=slave logged on).
Via the Log on/off procedure the user can log on/off
the slave.
MASTER SLAVE LOGOUT LOGON
busy free busy tone/ringing on Line 2 busy tone
free busy ringing on line1 busy tone
busy busy busy tone/ringing on Line 2 busy tone
The Log on / Log off procedure
Procedure for logging on
*28# or a programmed "Slave log on/off"-key.
If the slave is logged on, the LED of the "Slave log on/
off" key shows steady light. The access for incomimg
calls to second line will be blocked automatically and
the corresponbding key "Busy Line 2" / "Free on 2nd
access" depending on the programming shows steady
light or extinguishes. The display shows:
EXECUTIVE telephone
STANDARD telephone
Procedure for logging off
#28# or a programmed "Slave log on/off" key
By this simple procedure the slave can be set to "Log
off" mode. During that mode the slave is blocked for
incoming calls. Incoming calls will be indicated (only)
on the master telephone.
During this logged-off period it is still possible for the
slave to set up a call.
10 Jul 14:40 +15˚
SECOND USER LOGGED ON
directory redial prog
10 Jul 14:40 +15˚
2nd USER LOGGED ON