User`s guide

8(10)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
98-05-29 D
480/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Programming
5630
Assign slave extension number
After a cold start all extensions are initialised as
"master". This command is used to link two extensions
together as a TANDEM configuration.
After a slave has been assigned to a master, both
extensions have the same common directory number.
The common directory number is always the directory
number of the master.
This command states which slave has been assigned
to which master.
By default, no slave is assigned to a master.
As far the slave has been assigned to a master, some
extension commands are out of function for the slave
and marked out.
It is not allowed to define a guest extension as "slave"
to avoid losing guest data in the hotel application.
HINT First the guest extension (command
0118) has to be set to NO.
0165
Diversion on no reply to slave
This command activates the diversion on no-reply.
xxxx Enter common directory number
z Enter relevant function:
Y = Yes (default data)
N = No
0166
Slave always logged on
This command states whether the related slave should
be permanently or temporarely logged on by the user
via the "slave logon"-key or the procedure *28#.
xxxx Enter common directory number
z Enter relevant function:
Y = Yes
N = No (default data)
NOTE: If this command is set to "YES", the
ringing indication is always indicated on
both telephones, independent of the
programming of command 0167.
0167
Ringing indication on master and slave
This command states if , while the slave is temporarely
logged on, the ringing indication should take place only
on the slave or on both the master and the slave.
If it is programmed that the ringing indication should
take place on both (master and slave) the type of
ringing indication will be the same as has been
programmed on the master.
xxxx Enter common directory number
z Enter relevant function:
Y = Yes (default data)
N = No
10 Jul 14:40 +15˚
DIV.ON NO REPLY SLA? 0165 xxxx z
backward forward c/i return
10 Jul 14:40 +15˚
SLAVE ALWAYS LOGON? 0166 xxxx z
backward forward c/i return
10 Jul 14:40 +15˚
RING ON MAST.&SLAVE? 0167 xxxx z
backward forward c/i return