User`s guide

1(2)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
97-10-31 D
485/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
SEA/TB/MP M.Plattner
SEA/TB/MP ASB 150 02
SEA/TB/XE
TRANSFER
Definition
Internal or external calls can be transferred to another
party.
Transfer can be done before or after answer.
Transfer can also take place to a busy extension.
See also under
CAMP ON - INCOMING EXTERNAL TRAFFIC,
document 146/155 34-ASB 150 02 Uen,
CAMP ON - INQUIRY,
document 147/155 34-ASB 150 02 Uen and
CAMP ON - INTERNAL CALLS,
document 148/155 34-ASB 150 02 Uen.
Use
The transfer function is used among other things for
the simplified OPERATOR function, when the
OPERATOR uses an EXECUTIVE Telephone, to
extend an incoming external call.
Transfer can also be utilised by normal extensions
when it is desired that someone else shall take over an
ongoing call.
If transfer is effected before answer, time supervision is
started. If no answer is obtained before the
programmed time expires the transferring party will be
recalled.
See also RECALL,
document 440/155 34-ASB 150 02 Uen.
Operation
System Telephones
• Transfer begins with inquiry
• Transfer request is made by pressing
- Transfer or
- going on hook (replacing handset).
Lamps for both inquiry call and parked call extin-
guish.
Extension encounters silence in handset or
handsfree mode
Analogue telephones
• Transfer begins with inquiry
• Transfer request is made by extension going on
hook (replacing handset)
If transfer is forbidden
• Transfer via pressing the transfer-key
The key depression will be ignored and the esta-
blished speech connection remains.
• Transfer via on hook
The party who initiated transfer will be recalled
by the previously connected party.
Capacity
Not applicable.
485.fm
Database reference