User`s guide

2(2)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
97-10-31 D
485/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Limitations
If there are several individually parked parties, the
party who was parked last will be transferred.
Transfer is possible only to a party who, according to
the traffic group matrix, can be interconnected to the
parked party.
If none of the two conversation parties can provide a
clear signal, the call will be cleared down automatically
after 2.5 minutes.
To be able to transfer a call, the called party's Line 1 or
Line 2 must be free.
A transferring party is charged for the outgoing
external call until the called party answers.
It is not possible to transfer 2 external parties via
on hook from a system telephone, but by pressing the
Transfer-key.
Programming
0101
Facility COS
Default data permits transfer before answer.
If transfer before answer is to be prevented it will be
necessary to assign a facility category to this function.
Those extensions that are forbidden to transfer before
answer are assigned the selected facility category.
xxxx Enter extension's directory number
zz Enter relevant facility category (0 - 15)
3002
Program facility category list
This command states whether or not the facility
categorisation allowes transfer before answer.
default data YES
For programming of the facility category list, see also
CATEGORISATION,
document 149/155 34-ASB 150 02 Uen.
Program a separate key for transfer
0301
Function of key
For users extending many calls it is advisable to
program a separate Transfer-key.
This command is only relevant for the
business layout 1.
See document PROGRAMMABLE AND FIXED KEYS,
404/155 34-ASB 150 02 Uen.
xxxx Enter extension's directory number.
yy Enter selected programmable key (00 - 48)
zz Enter function code = 36
2082
Transfer via onhook
This feature is always active for R-key instruments.
This system command states if Transfer via onhook
should be active for system telephones, too.
default data YES
Equipment
None.
10 Jul 14:40 +15˚
FACILITY COS 0101 xxxx zz
backward forward c/i return
10 Jul 14:40 +15˚
FUNCTION OF KEY 0301 xxxx yy zz
backward forward c/i return