User`s guide

2(4)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
97-10-31 C
487/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Programming
0103 - 0104
Categorisation of extensions
The extensions can be divided into:
• Nine external number categories for day traffic
(0 - 8)
• Nine external number categories for
night traffic (0 - 8)
Default data for extensions and trunks is group 0 for
both day category and night category (COS), that is
the extensions are open for all traffic.
xxxx Enter extension's directory number
z Enter relevant day category (0 - 8).
Step to command 0104
xxxx Enter extension's directory number
z Enter relevant night category (0 - 8).
Categorisation of trunks
For transit traffic an incoming trunk can be assigned
external number categories in the same manner as
extensions.
2201
Program the TCD-table
Each opened number interval needs to be
programmed (entered) in the TCD-table
xx Enter destination's sequence number
(0 - 99)
Press Enter
START= Enter lowest number in interval (1 - 10)
digits
END= Enter highest number in interval (1 - 10)
digits
Step to the next destination and repeat procedure.
10 Jul 14:40 +15˚
TCD-DAY COS 0103 xxxx z
backward forward c/i return
10 Jul 14:40 +15˚
TCD-NIGHT COS 0104 xxxx z
backward forward c/i return
10 Jul 14:40 +15˚
OPEN NO_INTERVALS 2201 xx >
backward forward c/i return
10 Jul 14:40 +15˚
START= END=
backward forward c/i return