User`s guide

6(10)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
97-10-31 D
486/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Is the system connected to the public net, it always
acts as a slave and takes over the clock from the public
net.
Using the following two commands the times for tone/
pause for DTMF-transmission can be adjusted. The
times are common for all trunk lines:
2613
DTMF time (ms)
Time for tone sending
2614
DTMF pause (ms)
Time for pause
MFC-signalling
1302
Outgoing digit transmission
Select MFC/MFE =2
1312
MFC-signal scheme
Select MFC/MFE-signalling scheme. Inital data=00
(Standard MFC R2)
Monitoring times
The time between digits for outgoing digit transmission
can be set. After a certain number of digits a shorter
monitoring time can be connected.
1401-1407 Monitoring times.
1401
No of digits with long dial supervision
Maximum number of digits before short time.
Initial data = 4 digits
1402
Time for long supervision time of external digits
Long monitoring time. Initial data = 30s
1403
Time for short supervision time of external digits
Short monitoring time. Initial data = 8s
1405
Wait time before metering is stopped
Time for last meter pulse. Initial data = 000ms
1406
Wait time before ringback/rerouting at not
answered calls
States time before call is diverted. Initial data = 60s
1407
Maximum hold time
Time for forced release
States time before a call parked for common access
that cannot be diverted is disconnected.
Initial data = 5s
1408
Minimum speech time for not increasing
disturbance counter
States shortest conversation time in order to increment
fault counter. Initial data = 30s