User`s guide

3(4)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 G
521/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
3071
Indication of external voice message?
An external mail system can be connected to ASB 150
via an analogue extension interface. By sending
special DTMF-codes to ASB 150 the system can
indicate whether or not an extension has an
unanswered message. Other extensions shall not be
able to alter the indication by using the same codes.
This command is used to state for which A-category/
categories it is permitted to alter the indication that an
extension has a message in an external message
system.
2023
External voice mail number
Number to call the external voice mail system.
An external voice mail system can be connected to
ASB 150 via an analogue extension board or via
proprietary networking functionality. A programmable
key can be defined for the external voice mail function.
The LED associated with the key will indicate a
message to the extension.
Press the key to listen to the message. By pressing the
key a call is made to the voice mail system. This
command is used to define the number to be called.
If the external voice mail system is connected via an
analogue extension board the number to be called is
the number of the analogue extension connecting the
voice mail system. If the external voice mail system is
connected via more than one extension line, a PBX-
group should be created. The PBX-group should be
programmed to contain all extension lines used to
connect the voice mail system, and this command
should specify the number of the PBX-group.
If the external voice mail system is connected via a
proprietary private network, the number to be called is
the private network number of the external voice mail
system located in another PBX.
Valid data: up to 8 digits
Default data:-
0125
Voice mail extension?
This command must be set to YES for analogue
extension positions used for connecting to an external
voice server.
This is for sending DTMF tones to give the information
which extension is diverted to the Mailbox system.
0143
Line break for ELU-A
With this command you can state the duration of a line
break.
Valid values for this command are 0 - 255.
The value zero indicates no line break.
Set value to 20 for sending Loop break to Voice Mail
server.
Programming for Automated Attendant
0121
DTMF to own telephone
There exist peripheral (external) units that can be
connected to an extension position and be controlled
by DTMF-tones.
This command is used to determine whether digits
dialled by the call partner can be transmitted as
DTMF-tones to the connected unit.
Set this command to YES.
0125
Voice mail extension?
This command must be set to NO for analogue
extension positions used for Automated Attendant.
0143
Line break for ELU-A
With this command you can state the duration of a line
break.
Valid values for this command are 0 - 255.