User guide

67BusinessPhone – Dialog 4224 Operator / Dialog 3214
Messages
Note: Depending on the configuration, you might be asked
for your Password before you can retrieve your messages.
See section “Security” on page 75.
receive Press (see display).
new Select message category (see display).
New, heard, read or stored.
call-back Select message type (see display).
Note: If only one message type is available (Callback, Voice
or Text messages), this step is excluded. If an internal caller
has left a message, the name and number is displayed. In
case of an external caller, you can see the number, if this
feature is provided by the network.
Use the menu keys to check the message (see display).
Voice messages will be heard via the speaker or the handset.
Call Me messages will call the sender automatically.
Text messages are read in the display.
Select one of the following options:
next Press to check the next message (see display).
erase Press to erase the message (see display).
store Press to store the message (see display).
Up to 20 messages can be stored. Callback messages cannot be
stored.
Message
ÕÔ Press to finish the procedure.
12 May 10:35 +15°^|| OPERATOR 200
C= 0 I= 0 ||
||
MESSAGE 3 2 12
return new heard stored
Dialog4224En.book Page 67 Wednesday, April 2, 2003 3:19 AM