User guide

67Dialog 4422 IP Office

Settings

Programming of Function keys

One prerequisite for own programming of a Function key is that

your system administrator has removed at least one of the

functions assigned to the Function keys by default. By removing

these preprogrammed functions, the keys become available for

programming. All Function keys, except for the Triple Access Line

keys, can be used for programming.

Frequently used functions (

*XX#) and phone numbers can be

programmed on the Function keys for easy access. When you

want to use the function or phone number, just press the key.

Certain functions must be preprogrammed by your system

administrator.

Note: To be able to program a Function key, the phone

normally has to be logged on to the exchange (this is set by

your system administrator).

Program or change a function

Settings Ô Press.

The

Function Keys menu is framed.

Press.

Ô Press the Function key to program.

Note: If the key is already programmed, the number or

function will be displayed.

Programmable Keys

Press the key to program