Operation Manual

Programming and Adjustments
Dialog 3210, 3211 and 321282
To store the current melody:
{g Press the flashing line key (Access 1 or Access 2 or Inquiry)
Program
(g Press
The current melody is stored.
Note: The melody is not activated, see section “Activate or
deactivate a stored melody” on page 82.
To delete the current melody:
X Press and hold until no notes are displayed
{g Press the flashing line key (Access 1 or Access 2 or Inquiry)
Program
(g Press
Activate or deactivate a stored melody
A stored melody has to be activated in melody mode to be heard
when you get an incoming call.
To activate (in melody mode):
g Press the key for the requested type of call (Access 1 or
Access 2 or Inquiry)
The corresponding key lamp is switched on:
Access 1 key = Internal calls
Access 2 key = External calls
Inquiry key = Callback calls
Note: If you want to return to an ordinary ringing singnal but
keep the melody stored, just press the key for the requested
type of call again. When key lamp is off the stored melody
is deactivated.
# Press to exit melody mode