Operation Manual
Table Of Contents
- Welcome
- Table of Contents
- Important
- Description
- Incoming Calls
- Outgoing Calls
- During Calls
- Call Forwarding
- Information
- Internal Messages
- Mailbox System
- Hot Keys
- Group Facilities
- Other Useful Facilities
- Security
- Least Cost Routing
- Phone Book
- Settings
- Audible Adjustments
- Tones and Signals
- Useful Hints
- Installation
- Troubleshooting
- Glossary
- Index
- Voice Guide
Internal Messages
BusinessPhone – Cordless DT400/DT410/DT420/DT43036
Manual absent
Note: This feature is only available for the DT410, DT420
and DT430 telephones.
Activate manual absent if you cannot receive any messages. The
system will then receive an absent notice, and keeps track of if you
can be reached or not.
This function has to be programmed as a Hot key. Set one Hot key
as “Manual absent on” and another as “Manual absent off”. How to
program a Hot key, see section “Edit a Hot key” on page 46.
Activate
z
Press and hold the pre-programmed Hot key
The display shows:
Deactivate
z
Press and hold the pre-programmed Hot key
The display shows:
Manual
absent on
Manual
absent off