Operation Manual
Table Of Contents
- Welcome
- Table of Contents
- Important
- Description
- Incoming Calls
- Outgoing Calls
- During Calls
- Call Forwarding
- Information
- Internal Messages
- Mailbox System
- Hot Keys
- Group Facilities
- Other Useful Facilities
- Security
- Least Cost Routing
- Phone Book
- Settings
- Audible Adjustments
- Tones and Signals
- Useful Hints
- Installation
- Troubleshooting
- Glossary
- Index
- Voice Guide
59BusinessPhone – Cordless DT400/DT410/DT420/DT430
Other Useful Facilities
Non-movement alarm
Note: This feature is only available for the DT430. The
DT420 can be fitted with an optional Non-movement alarm.
If you have not moved within 30 seconds and are unable to raise an
alarm yourself, a sensor inside the phone will alert the operator.
To use this feature, you have to activate the Non-movement alarm
feature first. You can do this via the display menu or by programming
the function as a Hot key, see “Edit a Hot key” on page 46.
Activate Non-movement alarm
O
Press to enter the menu
fO
Select “4 Settings” and press
fO
Select “8 Non-movement” and press
The display shows:
Note: If the Non-movement alarm is already turned on, the
display will show “On” instead of “Off”. If you want to keep
the alarm on, just press C to exit the menu without changes.
fO
Select “On” and press
The Non-movement alarm is set.
C
Press to exit the menu
The display shows a small “A” in the last row. This indicates that the
Non-movement alarm is set:
Note: It is recommended to program two Hot keys to
activate and deactivate the Non-movement alarm. How to
program a Hot key, see section “Edit a Hot key” on page 46.
Off
System A
A