Operation Manual
Table Of Contents
- Welcome
- Table of Contents
- Important
- Description
- Incoming Calls
- Outgoing Calls
- During Calls
- Call Forwarding
- Information
- Internal Messages
- Mailbox System
- Hot Keys
- Group Facilities
- Other Useful Facilities
- Security
- Least Cost Routing
- Phone Book
- Settings
- Audible Adjustments
- Tones and Signals
- Useful Hints
- Installation
- Troubleshooting
- Glossary
- Index
- Voice Guide
Other Useful Facilities
BusinessPhone – Cordless DT400/DT410/DT420/DT43060
Cancel Non-movement alarm
The alarm will go off when you have not moved within 30 seconds.
Five seconds before the alarm is activated a warning signal sounds
and the “A” icon starts to flash.
If it is not a case of emergency, you can cancel the non-movement
alarm within this time.
Move the telephone or press any key to cancel the alarm
The display returns to normal state:
The “A” icon on the display indicates that the non-movement alarm
is still in operation.
Send Non-movement alarm
If the alarm has not been reset during the warning signal period, the
alarm is sent to the alarm central. No further action will be
necessary.
The display will show:
Deactivate Non-movement alarm
To deactivate the Non-movement alarm, you have to program a
Hot key first, see section “Hot Keys” on page 43.
z
Press the pre-programmed Hot key to deactivate the alarm
feature
System A
A
Non-movement