Operation Manual
Table Of Contents
- Welcome
- Table of Contents
- Important
- Description
- Incoming Calls
- Outgoing Calls
- During Calls
- Call Forwarding
- Information
- Internal Messages
- Mailbox System
- Hot Keys
- Group Facilities
- Other Useful Facilities
- Security
- Least Cost Routing
- Phone Book
- Settings
- Audible Adjustments
- Tones and Signals
- Useful Hints
- Installation
- Troubleshooting
- Glossary
- Index
- Voice Guide
Audible Adjustments
BusinessPhone – Cordless DT400/DT410/DT420/DT43084
Trembler
The trembler is a vibration alarm and can be ordered as a factory
featured option to your Cordless.
If your Cordless is equipped with a trembler, you can set the
vibration alarm instead of the ringing signal to indicate incoming
calls and messages:
O
Press to enter the menu
fO
Select “3 Alerting” and press
fO
Select “4 Trembler” and press
fO
Scroll to choose between “Yes” and “No” and press
C
Press to exit the menu
A call will now be indicated by both the trembler and the audio
signal. If you want only the trembler to indicate calls, you have to
mute the ringing signal first.