Operator`s manual

From the Maintenance Window, your options are:

F1-Calib Select this option if you want to:

Align the power, modulation and squelch settings

across the band.

F2-Track Select this option if you want to:

Edit the radio tracking data and then update the values

in the radio.

F3-Featur Select this option if you want to:

Edit the Feature Authorization data.

F4-Freq Select this option if you want to:

Modify the frequencies used for calibration.

F9-Help Select this option if you want to:

Receive further information pertaining to a field area.

Shift F9

Window Help

Select this option if you want to:

Receive further information pertaining to the present

window.

F10-Back Select this option if you want to:

Exit the Utility Program.

CALIBRATION FREQUENCIES (PCS Only)

From the Maintenance Window, press F4 Freq to show the calibra-

tion frequencies. These frequencies will be used later during the calibra-

tion procedure. You may want to write down these frequencies for later

setting up your service monitor, etc.

The purpose of the Calibration Frequency window is to allow the user

to modify the frequencies if desired. However, the factory calibration

frequencies are recommended.

As shown in Table 2, the PCS radio divides the tracking data into 6

band segments. All frequencies within each band segment use the same

tracking data.

LBI-38898