Operator`s manual

5. When the PTT switch is pressed continuously for a pre-programmed
time (default of 30 seconds), the carrier control timer (if enabled) will
sound a pulsed alert tone and unkey the transmitter. Release and press
the PTT switch again to reset the timer and resume conversation.
SCAN OPERATION
SCAN SETUP
You may program your radio to scan a number of Channels for activity on
the selected system.
Starting Or Stopping SCAN
Press the SCAN button to alternate between Scan on (SCN indicator
illuminated) and Scan off (indicator dark).
Adding/Deleting To/From SCAN
SCAN should be off before changing the SCAN list.
1. Press the menu button until SCAN A/D is displayed.
2. Press the GROUP/SEL (-) button until the CHANNEL name is
displayed.
3. Press the GROUP/SEL (+) button until the desired priority level is
displayed by the scan priority indicators on the right side of the
display; the choices are S, P2; P1 or all off (all off removes the channel
from the SCAN list).
4. Press the CLR button when completed to return to normal operation.
If your radio has one of the auxiliary keys pre-programmed to edit the
SCAN list, the list may be changed by using the GROUP/SEL buttons to
display the CHANNEL name, and then pressing the auxiliary key until the
desired level is displayed.
Always speak in a normal tone of voice. Hold the microphone cupped
in your hand and touching your cheek lightly. Speak across the face of
your microphone, not directly into it. Shouting will degrade your
transmission, so do not speak any louder than normal.
NOTE
41