Installation manual

LBI-38987B RELATED PUBLICATIONS
8
RELATED PUBLICATIONS
It may be necessary to consult one or more of the
following documents during the installation process. These
manuals will also provide additional guidance if you
encounter technical difficulties during the configuration
process.
LBI-38430 -MASTR IIe Control Shelf Maintenance
Manual.
LBI-38636 -MASTR III Base Station Installation Manual.
LBI-38822 -Turbo Board (GETC1e) Maintenance Manual.
LBI-38894 -GETC Trunking Card Maintenance Manual.
LBI-38896 -EDACS Site Downlink and CEC/IMC Uplink
Configuration Manual.
LBI-38988 -EDACS Station GETC1e Configuration
Manual.
LBI-39149 -EDACS Compact Vertical Voter Maintenance
Manual.
LBI-39186 -EDACS Simulcast Control Point Maintenance
Manual.
LBI-39187 -EDACS Voted Digital Interconnect
Configuration Manual.
SRN-1009 -Software Release Notes for GETC SCAT
Software344A3835G2
SRN-1010 -Software Release Notes for GETC Turbo
Board Software, 344A4414G1 only.
SRN-1060 -Software Release Notes for GETC1e
Software, 349A9607G1 (or later).
SRN-1061 -Software Release Notes for Link Software,
344A4895G1 (or later) and Link Turbo
Software 350A1121G4 (or later).
SRN-1062 -Software Release Notes for Turbo Board with
GETC1e Software, 344A4414G2 (or later).
TQ-3357 -GETC Shelf Programming Manual
SOFTWARE COMPATIBILITY
EDACS COMPATIBILITY
The data presented in Table 2 represents the minimum
EDACS component software versions required to support
the Release 5 software features.
RADIO COMPATIBILITY
SCAT operation can only be performed by radios
equipped to use a SCAT channel.
Table 3 describes the minimum software requirements
for radio products supporting the features included in
Release 5 software.