Remote Starter User Manual

LBI-38988 OPERATIONAL CHECKOUT
28 Rev. B
Table 12 - LED Indicators for Failsoft Assigned
Channels
LED Indicators L1 L2 L3 L4 L5 L6 L7
Failsoft Assigned WB
Clear Call
●❍❍❍❍●❍
Failsoft Assigned WB
Digital Voice Call
●❍❍❍❍●●
Failsoft Assigned NB
Clear Call
●❍●❍❍●❍
Legend: ❍ = OFF ● = ON ❉ = FLASHING
Satellite Site Receiver
Verify proper operation of a GETC used in as a
Satellite Site Receiver by observing the GETC LED
indicators when the receiver is used as a Control Channel
and idle or assigned Working Channel as shown in Table
13.
Table 13 - LED Indicators for Satellite Site Receivers
LED Indicators L1 L2 L3 L4 L5 L6 L7
WB Working Channel
Satellite Site Idle
●❍❍❍❍❍●
WB Working Channel
Satellite Site Assigned
●❍❍❍❍●●
WB Control Channel
Satellite Site
●●❍❍❍❍●
WB Working Channel
Remote Simulcast
Assigned
●❍❍❍❍●❍
Legend: ❍ = OFF ● = ON ❉ = FLASHING
INTERFACE SIGNALS
Table 15 describes the various interface signals
between the GETC and the Station Repeater. For the
specific location of these signals, refer to the Interconnect
Diagrams.