User guide

Getting Started with the Configuration Manager
EN/LZT 108 6492 R1 17 (98)
April 2003
4.3.1 Rebooting the HM210dp/di using the Configuration Manager
If, after rebooting the device, you find that it does not operate properly with the new
configuration, you can reboot using options that reactivate a previous configuration or
the factory default configuration.
Figure 6: Reboot Mode page
You can select from the following options when rebooting:
Setting Description
Reboot Reboots the device to activate your new settings (if any).
Reboot from Default
Configuration
Reboots the device to default settings provided by your ISP or the
manufacturer. Choosing this option erases any custom settings.
Reboot from Backup
Configuration
Reboots the device using settings stored in backup memory. These are the
settings that were in effect before you committed new settings in the current
session.
Reboot from Last
Configuration
Reboots the device using the current settings in permanent memory,
including any changes you just committed.
Reboot from Clean
Configuration
Reboot from Minimum
Configuration