User guide

93Dialog 4425 IP Vision
Installation
Installation
Install cables
The handset cable has to be plugged in “HANDSET”, the cable to
the local area network has to be plugged in “LAN” and if an
external power adapter is used this has to be plugged in “terminal
POWER”. You can put the cable to the handset in the notch
underneath the telephone. When only one single wall terminal for
the local network is available, a PC can be connected to "PC" to be
connected to the network via the phone.
Change cables
To remove a cable, use a screwdriver to unlock the stop.
Handset cable to the left Handset cable to the right