Quick start guide
What's included Remote E1 device USB-C power supply Power cable HDMI cable USB-C to USB-A adapter Micro-USB cable
Remote 1 Turn upside down Top Mouse mode indicator (blue LED) B Charging indicator (red LED) Power on/off Bottom C Turn mouse mode on/off D Activate voice control (short press) C Home (long press) E Switch apps Back (short press) Quit app (long press) Volume - F Volume + A B C D E F Cameras Microphones USB-C ports HDMI port Power button Ethernet port(s) (if you have a router model it has two Ethernet ports)
2 Connect the E1 device to your TV A Plug an HDMI cable into your TV B Plug the other end of the cable into the HDMI port on the bottom of the E1 device 3 Connect the power supply A Connect power supply cable to USB-C port B Connect power cable to power supply C Plug into wall outlet
* Connect via Ethernet (optional) * Use as a wireless access point (optional - router model only) LAN WAN Router model If you have a router model, you may use it as a wireless access point to connect other Wi-Fi devices. Refer to the router setup guide for more information. A Plug an Ethernet cable into the E1 device B Plug the other end of the cable into your modem If you would rather connect via Wi-Fi, you may do so using the on-screen setup once the E1 device is connected to your TV.
4 Power on 5 Turn right side up Bottom Press the power button for one second and release. Wait for the button to turn green. Do not press more than once. Top Ensure that the cables below the box aren’t pushing the power button.
6 Placement Success Setup screen should appear on your TV. Press OK on the remote to begin. Follow the instructions on your screen.
Charging the remote Remote keyboard OK VOL Press and hold the shift button to use capital letters. To use numbers and symbols in blue, hold down the 123 button while typing.
Charging a game controller Common questions (game controller not included) Why does my TV screen say “no input”? Your TV may be set to the incorrect input or source. There’s a quick fix for this! Just press the “input” or “source” button on your TV remote until you select the HDMI connection that matches the port your HDMI cable is plugged into on your TV. Why is there a mouse cursor on my screen? If the remote moves a mouse cursor freely around the screen, it is in "mouse mode".
Do not cover Keep the upper vents clear and open. To prevent overheating, do not cover or place objects on top.
LZT 138 2195
Regulatory Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Safety Notice This product is intended for indoor use only. “CAUTION” Risk of explosion if the RTC battery is replaced by an incorrect type. External surfaces that need not be touched to operate the equipment (< 1 s) This unit is intended to be supplied by a Certified USB Type-C AC Power Adapter suitable for use at Tma 40 degree C whose output meets ES1, non-hazardous energy level, and is rated O/P: 5Vdc/3A or 9Vdc/ 3A or 15Vdc/ 3A or 20Vdc/ 5A.
