Quick Start Guide

Common questions
Why does my TV screen
say “no input”?
Your TV may be set to the incorrect input or
source. There’s a quick fix for this! Just press
the “input” or “source” button on your TV
remote until you select the HDMI connection
that matches the port your HDMI cable is
plugged into on your TV.
Why is there a mouse
cursor on my screen?
If the remote moves a mouse cursor
freely around the screen, it is in "mouse
mode". Mouse mode is active if the blue LED
on the remote is lit. To turn mouse mode
on/off, press the mouse button on the
remote.
How do I pair my remote?
The remote is pre-paired to the E1 device.
If the blue LED on the remote is flashing
slowly, pairing has been lost.
To re-pair:
• Turn off the E1 device and unplug power.
• Simultaneously press Volume + and -
buttons on remote until the blue LED
flashes rapidly.
• Plug in and power up the device.
• Hold the remote approximately 10 cm from
the device during the pairing process.
• When the remote is paired, the blue
LED will stop flashing and light up
solid blue.
Keep in mind
Keep the upper vents clear and open. To
prevent overheating, do not cover or place
objects on top.
Have a good time, and enjoy.
Do not use in the bathtub.