Router Operator's Manual

LBI-39001
2
TABLE OF CONTENTS
1. SCOPE ................................................................................ 3
2. QUICK USAGE GUIDE..................................................... 4
2.1. Making Phone Calls From An EDACS Radio............. 4
2.2. Calling EDACS Radios From A Phone........................ 5
3. DETAILED USAGE GUIDE.............................................. 7
3.1. Radio Users................................................................... 7
3.2. Phone Users .................................................................. 8
4. GLOSSARY........................................................................ 11
This manual is published by Ericsson GE Mobile Communications
Inc., without any warranty. Improvements and changes to this manual
necessitated by typographical errors, inaccuracies of current
information, or improvements to programs and/or equipment, may be
made by Ericsson GE Mobile Communications Inc., at any time and
without notice. Such changes will be incorporated into new editions of
this manual. No part of this manual may be reproduced or transmitted in
any form or by any means, electronic or mechanical, including
photocopying and recording, for any purpose, without the express
written permission of Ericsson GE Mobile Communications Inc.
Copyright© June 1994, Ericsson GE Mobile Communications Inc.
LBI-39001
11
4. GLOSSARY
AC Authorization Code -- the MD110 authorization code
defined for EDACS interconnect calls. The AC is
customer-defined and may be from 1 to 7 digits, but
cannot begin with "0."
DID Direct Inward Dial -- allows callers from the public
network to place an individual call to a radio by dialing
a single telephone number, instead of one telephone
number to call Jessica and a second series of numbers to
indicate the Logical ID (LID). To accomplish this, the
LID is mapped to a number. In some cases, the DID
number will be the LID.
DTMF Dual Tone Multi-Frequency -- standard telephone
dialing tones.
FC Feature Code -- the MD110 feature code indicating that
an authorization code (AC) is to be entered. This
feature code is market-dependent and typically is a
single digit. For example, a "6" is used as the FC in the
U.S.
LCR Least-Cost Routing -- a function that allows the system
to automatically select the most economical route for an
outgoing call. The selected route is based on trunk
availability, class of service, time of day, and week.
LCR is available for outbound calls only.
LID Logical Identification -- individual radio or console ID.
MD110 Ericsson PBX that provides connectivity to the PSTN.
PBX Private Branch Exchange -- a telephone switch
commonly used in business applications.
PSTN Public Switched Telephone Network.