LIP-8002/8002A IP Phone User Guide for iPECS Please read this guide carefully before operating your set. Retain this guide for future reference.
LIP-8002/8002A iPECS IP Phone User Guide Regulatory and Safety Notices LIP-8002/8002A 1. Radio Frequency Emissions: FCC Compliance statement: This device complies with Part 15 rules. Operation is subject to the following two conditions; 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
LIP-8002/8002A iPECS IP Phone User Guide Care & Precautions: Before connecting or using your new phone, take a moment to consider safety and reliability. Use common sense when locating, connecting and using your LIP-8002/8002A Phone. Locate on a dry level surface. Keep the phone away from the edges of the surface to avoid the potential of a fall. Locate cables to avoid potential for damage. For example, do not locate under rugs or carpet as damage may result from foot traffic or heavy objects.
LIP-8002/8002A iPECS IP Phone User Guide Table of Contents 1. LIP-8002/8002A IP Phone Overview .....................................................................1 2. Installing your LIP-8002/8002A Phone .................................................................3 3. Using Features of LIP-8002/8002A Phone ...........................................................4 4. 5. 3.1. Receiving a Call...................................................................................................
LIP-8002/8002A iPECS IP Phone User Guide 5.9. Language Setting........................................................................................................................ 16 Appendix A Dial Pad Character Set ...........................................................................................
LIP-8002/8002A iPECS IP Phone User Guide 1. LIP-8002/8002A IP Phone Overview Your new LG-Ericsson LIP-8002/8002A Phone is an Internet Protocol (IP) phone employing Session Initiation Protocol (SIP), the well-known open standard for establishing, managing and terminating a communication session. LIP-8002/8002A Phone interoperates with call servers, proxies and gateways to exchange SIP signaling messages for call control.
LIP-8002/8002A iPECS IP Phone User Guide The figure below shows other major components of LIP-8002/8002A Phone.
LIP-8002/8002A iPECS IP Phone User Guide 2. Installing your LIP-8002/8002A Phone The figure below shows the cable connections for your IP Phone. The LAN and desktop PC connections employ standard category 5 LAN cables terminated with RJ-45 connectors. The LIP-8002 supports PoE (Power over Ethernet) in accordance with the IEEE-802.1af industry standard. (The LIP-8002A doesn’t support PoE and can use only the supplied adaptor.
LIP-8002/8002A iPECS IP Phone User Guide 3. Using Features of LIP-8002/8002A Phone 3.1. Receiving a Call When you receive a call, your phone rings, the LCD displays the incoming call information. To answer a ringing call: o Lift the handset or press the speakerphone button. To end the call: o Hang up the handset. If using the speakerphone, press the speakerphone button. 3.2. Placing a Call You place calls with the handset on-hook or off-hook.
LIP-8002/8002A iPECS IP Phone User Guide 3.4. Announcing a Call Transfer Using Announcing a Call Transfer, you send an active call to another extension after announcing the call transfer to the receiving party. To transfer an active call: o o o o Press the Transfer button. The active call status changes to hold and you receive dial tone. Dial the number you wish to receive the transfer. Await answer and announce the transfer. To complete the transfer, hang up the handset.
LIP-8002/8002A iPECS IP Phone User Guide 3.7. 3-Party Conference The IP Phone has a 3-Party Conference feature that lets you converse with two other parties simultaneously. To set-up a conference: o o o o Place first call as normal. Press the Conference button. The call status changes to hold and you receive dial tone. Dial the number you want to join the conference. When the party answers, press the Conference button again to establish the conference. To end your conference: o Hang up the handset.
LIP-8002/8002A iPECS IP Phone User Guide 3.11. Speed Number Dialing Your LIP-8002/8002A Phone incorporates a Phone Book with up to 100 records. Refer to section 4.2 for information on use of the Phone Book. Each record includes a name, contact information and a Speed number (00 to 99). When you dial a Speed number, the IP Phone initiates a call to the contact. Speed number dialing must be enabled. Refer to your system administrator for further information.
LIP-8002/8002A iPECS IP Phone User Guide 3.15. Hotline/Warm-Line With Hotline/Warm-Line operation configured, the IP Phone automatically calls the defined destination when you take the handset off-hook or press the speaker button. The call initiates immediately, Hotline, or after a delay of up to 10 seconds, Warm-Line. The later permits you the time to access another feature or line as needed. Note that with Hotline configured, Speed dial, redial and other automated dialing features will not operate.
LIP-8002/8002A iPECS IP Phone User Guide 4. Advanced Services and the LIP-8002/8002A Phone LCD Menu This section describes how to view and use the advanced services available through the LCD menu. The navigation buttons navigate through menus. The menu items and order of display may be different on your phone based on the service subscription. Not all features may be available to you based on the call server configuration. 4.1.
LIP-8002/8002A iPECS IP Phone User Guide 5. Setting Your Preferences In the LCD Menu, you can set various preferences for the IP Phone. Settings you can adjust include: - LCD contrast - Ring Setting - Ringer off - Flexible button settings - Time Configuration - Outgoing Call Lock - Speed Number Dialing - Key Tone - Language The following paragraphs provide detailed instructions for each of the preferences as well as descriptive information for each. 5.1.
LIP-8002/8002A iPECS IP Phone User Guide o Dial 3, or move the cursor to 3.Phone Settings using the Up/Down navigation buttons and press the OK button. o Dial 2, or move the cursor to 2.Ring Setting using the Up/Down navigation buttons and press the OK button. o Dial 1, or move the cursor to 1.Default Ring Type using the Up/Down navigation buttons and press the OK button. An asterisk, , displays in front of the current setting.
LIP-8002/8002A iPECS IP Phone User Guide 5.4. Setting Flexible Buttons Your LIP-8002/8002A Phone has twelve (4) flexible buttons. The flexible buttons can access various functions. The table below indicates the available functions with a brief description of each.
LIP-8002/8002A iPECS IP Phone User Guide 5.5. Time Configuration Within the Time Configuration menu, the IP Address or name of the desired Simple Network Time Protocol (SNTP) server and the local time zone are defined. And, Daylight Savings Time (DST) is disabled. Consult with your administrator before changing the SNTP server. 5.5.1. SNTP Server Address SNTP (Simple Network Time Protocol) is a standard protocol that permits a network device to obtain the network’s current time.
LIP-8002/8002A iPECS IP Phone User Guide 5.5.3. DST Auto Adjustment The LIP-8002/8002A Phone automatically adjusts for DST (Daylight Savings Time) when enabled. To enable/disable automatic daylight savings time: ) button. o Press the Setting ( o Dial 3, or move the cursor to 3.Phone Settings using the Up/Down navigation buttons and press the OK button. o Dial 5, or move the cursor to 5.Time Configuration using the Up/Down navigation buttons and press the OK button. o Dial 3, or move the cursor to 3.
LIP-8002/8002A iPECS IP Phone User Guide o Dial 3, or move the cursor to 3.Phone Settings using the Up/Down navigation buttons and press the OK button. o Dial 5, or move the cursor to 5.Time Configuration using the Up/Down navigation buttons and press the OK button. o Dial 5, or move the cursor to 5.Date Format using the Up/Down navigation buttons and press the OK button. o Press the Up/Down navigation buttons to select the display format and press the OK button to save your entry.
LIP-8002/8002A iPECS IP Phone User Guide 5.8. Key Tone When you press a button on the LIP-8002/8002A phone, the phone will generate a beep tone to indicate that the button has been pressed. This key tone is optional and can be enabled or disabled using the key tone setting. To enable/disable Key Tone operation: ) button. o Press the Setting ( o Dial 3, or move the cursor to 3.Phone Settings using the Up/Down navigation buttons and press the OK button. o Dial 9, or move cursor to 9.
LIP-8002/8002A iPECS IP Phone User Guide Appendix A Dial Pad Character Set The LIP-8002/8002A Phone dial pad inputs digits or alphanumeric characters. The table below maps each dial pad digit to characters available. Four modes are available, dial pad digits, upper case letters and lower case letters as shown in the table.
LIP-8002/8002A iPECS IP Phone User Guide 18
1
