Manualshelf

User guide

ManualsBrandsEricsson ManualsConsumer electronicsLIP-8002E
11121314151617181920
LIP-8002/8002A iPECS IP Phone
User Guide
5. Setting Your Preferences
In the LCD Menu, you can set various preferences for the IP Phone. Settings you can adjust include:
- LCD contrast
- Ring Setting
- Ringer off
- Flexible button settings
- Time Configuration
- Outgoing Call Lock
- Speed Number Dialing
- Key Tone
- Language
The following paragraphs provide detailed instructions for each of the preferences as well as descriptive
information for each.
5.1. LCD Contrast
The contrast of the LCD is adjustable for best viewing angle.
To adjust the LCD contrast:
o Press the Setting (
) button.
o Dial 3, or move the cursor to 3.Phone Settings using the Up/Down navigation buttons and press the
OK button.
o Dial 1, or move the cursor to 1.LCD Contrast using the Up/Down navigation buttons and press the
OK button.
o Press the Down navigation button to decrease the contrast, or press the Up navigation button to
increase the contrast.
o Move to another parameter with the navigation buttons and continue the session or press the Setting
(
) button to exit the configuration session.
5.2. Ring Setting
Ring settings determine the ring type (tone) for the phone. You may select one of up to four ring signals.
In addition, the ring type can be set with immediate or delayed audible notification. Note that the ring type
set for a contact in the Phone Book has priority over the phone settings.
5.2.1. Setting the Default Ring Type
The IP Phone uses one of four distinctive ring types for incoming call notification. By assigning different
ring signals to closely located phones, you can identify the ringing phone. The ring type assigned for the
IP Phone is the “Default Ring Type” for incoming calls to the phone. The Default Ring may be set to one
of the four tones or “Ringer Off”, see section 5.3
. In addition, the ring signal can be immediate or delayed.
The delay is set in 1 second increments from 0 (no delay) to 10 seconds. (Use the Web Manager to
configure the delay for the ring.)
To set the ring type for the phone:
o Press the Setting (
) button.
10