User guide

LIP-8002/8002A iPECS IP Phone
User Guide
o Dial 3, or move the cursor to 3.Phone Settings using the Up/Down navigation buttons and press the
OK button.
o Dial 2, or move the cursor to 2.Ring Setting using the Up/Down navigation buttons and press the OK
button.
o Dial 1, or move the cursor to 1.Default Ring Type using the Up/Down navigation buttons and press
the OK button. An asterisk, , displays in front of the current setting.
o Select the ring type using the Up/Down navigation buttons and press the OK button to save the
selected ring type.
o Move to another parameter with the navigation buttons and continue the session or press the Setting
(
) button to exit the configuration session.
5.2.2. Setting the Trunk Ring Type
You can assign a different ring type for call from trunk line. Selections for the type include one of up to
four tones, “Ringer Off” or “Default Ring”, see section 5.2.1
. In addition, the ring signal can be immediate
or delayed.
To set the ring type:
o Press the Setting (
) button.
o Dial 3, or move the cursor to 3.Phone Settings using the Up/Down navigation buttons and press the
OK button.
o Dial 2, or move the cursor to 2.Ring Setting using the Up/Down navigation buttons and press the OK
button.
o Dial 2, or move the cursor to 2.Trunk Ring Type using the Up/Down navigation buttons and press the
OK button.
o Select the ring type using the Up/Down navigation buttons and press the OK button to save the
selected ring type.
o Move to another parameter with the navigation buttons and continue the session or press the Setting
(
) button to exit the configuration session.
5.3. Ringer Off
The IP Phone can be programmed not to ring when an incoming call is received.
To set the Ringer Off parameter:
o Press the Setting (
) button.
o Dial 3, or move the cursor to 3.Phone Settings using the Up/Down navigation buttons and press the
OK button.
o Dial 3, or move the cursor to 3.Ringer Off using the Up/Down navigation buttons and press the OK
button.
o Select Yes to enable Ringer Off, or select the No to disable Ringer Off using the Up/Down navigation
buttons and press the OK button.
o Move to another parameter with the navigation buttons and continue the session or press the Setting
(
) button to exit the configuration session.
11