User guide

LIP-8002/8002A iPECS IP Phone
User Guide
5.4. Setting Flexible Buttons
Your LIP-8002/8002A Phone has twelve (4) flexible buttons. The flexible buttons can access various
functions. The table below indicates the available functions with a brief description of each.
Feature Description
0 No Function Unassigned
1 Speed Dial Function Dials the assigned number
2 Phone Book Function Views the personal phone book
3 Call Log Function Views the call log list
4 Mute Function Toggles the Mute feature on and off
5 Headset Function Toggles the Headset on and off
6 Redial Function Dials the last number dialed by the user.
7 Return Call Function Dials the number of the last answered call
8 Set Call Forwarding Sets the call forwarding configuration
9 Conference Function 1. Initiates a conference call
2. Cancel the conference call
3. Joins calls in a conference
10 Transfer Function Initiates a call transfer
11 Hold Function Places an active call on hold
12 Do not disturb Toggles the DND on and off
13 Set Ringer Off Toggles the ringer on and off
14 Message Function Views the number of new and old messages stored in the Voice Mail
server, and dials the Voice Mail server by pressing the OK button.
46 Recording Function Records voice during call
48 Blind Transfer Initiate a blind call transfer
To assign a function to a flexible button:
o Press the Setting (
) button.
o Dial 3, or move the cursor to 3.Phone Settings using the Up/Down navigation buttons and press the
OK button.
o Dial 4, or move the cursor to 4.Flexible Key Setting using the Up/Down navigation buttons and press
the OK button.
o Select the desired flexible button. An asterisk, , displays in front of the current setting.
o Select a function using the Up/Down navigation buttons and press the OK button. Refer to the flexible
button functions chart above.
o If the selected function is Speed dial, enter the speed number and press the OK button to save the
entry. To enter alphanumeric characters select the Mode button. Refer to Appendix A
for the
character mapping of dial pad digits.
o Move to another parameter with the navigation buttons and continue the session or press the Setting
(
) button to exit the configuration session.
12