User guide

LIP-8002/8002A iPECS IP Phone
User Guide
5.8. Key Tone
When you press a button on the LIP-8002/8002A phone, the phone will generate a beep tone to indicate
that the button has been pressed. This key tone is optional and can be enabled or disabled using the key
tone setting.
To enable/disable Key Tone operation:
o Press the Setting (
) button.
o Dial 3, or move the cursor to 3.Phone Settings using the Up/Down navigation buttons and press the
OK button.
o Dial 9, or move cursor to 9.Key Tone using the Up/Down navigation buttons and press the OK button.
o Select Yes to enable Key Tone, or select No to disable Key Tone using the Up/Down navigation
buttons and press the OK button..
o Move to another parameter with the navigation buttons and continue the session or press the Setting
(
) button to exit the configuration session.
5.9. Language Setting
The IP Phone firmware includes an xml file, which, among other things, determines the languages
available to the phone. The Language setting determines the display of text in the LCD. When the xml
file contains more than one (1) language, you may select the language shown in the display.
To select an available language:
o Press the Settings (
) button.
o Dial 3, or move cursor to 3.Phone Settings using the Up/Down navigation buttons and press the OK
button.
o Dial 10, or move cursor to 10.Language using the Up/Down navigation buttons and press the OK
button.
o Select a Language from the list using the Up/Down navigation buttons and press the OK button. An
asterisk, , displays in front of the current selection.
o Move to another parameter with the navigation buttons and continue the session or press the Settings
(
) button to exit the configuration session.
16