Specifications

LIP-8002E/2AE Quick Guide ST
Flex Button Program
• Press the TRANS/PGM button.
• Press the flexible button to be programmed.
• Press TRANS/PGM button and User Program Code (refer to the following table).
• Press the HOLD/SAVE button.
(iPECS-CM/MG)
1) To assign Fixed or Number
• Press the TRANS/PGM button.
• Press the flexible button to be programmed.
• Press program type (1: Fixed button, 2: Number, 0: Delete).
• Choose the desired fixed button type (PTT, REDIAL, MUTE, CONFERENCE, ..) with
volume up and down button if the program type is Fixed button, or
• Enter Number to dial if the program type is Number.
• Press the HOLD/SAVE button.
2) To assign User Program Code
• Press the TRANS/PGM button
• Press the flexible button to be programmed
• Enter Program Mode Code and User Program Code (refer to the table)
• Press the HOLD/SAVE button to save .
System User Program Codes (LIK)
Code Function Remark
10 Enblock Mode Dialing
11 Intercom Ring Select Ring Tone 1-8
12 CO/IP Ring Select Ring Tone 1-8
13 Intercom Answer Mode Select ICM Signal mode, 1:HF, 2:Tone, 3:Privacy
14 Call Coverage Attribute Setting 1:ON/OFF, 2:Ring Delay (0-9)
15 Station Ring Download Ring Tone 5-8
19 Ear & Mic . Headset
21 Knock Down STA COS
22 Restore Station COS Requires Auth Code
23 Walking COS Requires Auth Code
30 VM Mobile Notify
31 Station Wait Retrieve
32 CLI/IP Message Wait Retrieve
9