Specifications

LIP-8002E/2AE Quick Guide ST
Conference:
A Conference flex button should be programmed.
• Place a call to first member.
• If first member answer, press Conf flex button and place a call to second member.
• If last member answer, press Conf flex button, twice.
* For conference more than 4 members in iPECS-LIK system, MCIM board is needed.
(iPECS-CM/MG)
• Place a call to first member.
• If first member answer, press Conference flexible button and place a call to second
member.
* For conference more than 4 members, VPCM board is needed in iPECS-CM.
* For conference members, VOIB (VOIU) board is always needed in iPECS-MG.
Call Hold:
• Press the HOLD button while on a CO call.
• Press the CO button or Loop button to rejoin call.
Call Forward:
A Call forward flex button should be programmed.
• Lift Handset or press SPEAKER button.
• Press DND button.
• Dial the type of forward code (0-5, SBG: 0-4).
1=Unconditional, 2=Busy, 3=No Answer, 4=Busy/No Answer, 5=Incoming CO Off-net
(Attendant only), 0=remote
• For Forward code 1-4, dial destination number.
• For Forward code 5, press CO/CO-Group button, and dial Speed number.
• For Forward code 0, dial password of forwarded station and enter the Forward code (1-4).
• 1=Unconditional, 2=Busy, 3=No Answer, 4=Busy/No Answer.
• Dial the destination number.
(iPECS-CM/MG)
• Press SPEAKER on and DND button.
• Dial the type of forward code (0-4).
6