Specifications

LIP-8002E/2AE Quick Guide ST

•

Enter the name associated to the number.

•

Press the Hold button; a confirmation tone will be heard.

Using Speed Dial Numbers:

•

Press the Speed button.

•

Dial the desired Speed dial bin number.

LIP-8002E/LIP-8002AE Installation

Note: LIP-8002E/8002AE IP-Phone can be powered by either AC adaptor or Power over

Ethernet (PoE, class 1). To use AC power, use only the LG-Ericsson Approved AC power

adaptor, which you can order separately. To use PoE, your connected LAN must support PoE.

<Important> Use either PoE or AC adaptor, not both, for power supply of your phone

1. Plug one end of the supplied LAN cable into the LAN Ethernet port on the back of your IP

phone marked with the symbol.

2. Plug the other end of the cable into your LAN Ethernet connection. (Do not extend the LAN

Ethernet cable to the outside of the building.)

3. (Optional) If you are connecting your PC Ethernet through the IP Phone, plug one end of the

LAN Ethernet cable into the PC Ethernet port on the back of your IP Phone marked with the

symbol.

<Important> Skip the following procedures from 5 to 6 if PoE is used for

power supply of your phone

4. (Optional) Plug the other end of the cable into your LAN Ethernet connection.

5. (Optional) Connect the AC power adapter (not supplied) to the AC adapter jack on the back of

your IP Phone. Fasten the cord with a hook to prevent it from being disconnected.

. (Optional) Plug the AC power adapter into the nearest AC power outlet. The phone will start

. (Optional) for the wall-mounting, sleeve of the CAT5 cable should be moved backward to

prevent it protrude.