Specifications

LIP-8002/8002A

iPECS Installer Guide

2. Installing the LIP-8002/8002A

2.1 Connecting the IP Phone

The figure below shows the cable connections for your IP Phone. The LAN and desktop PC

connections employ standard Category 5 cables terminated with RJ-45 connectors. The LIP-

8002 supports PoE (Power over Ethernet) in accordance with the IEEE-802.1af standard. (The

LIP-8002A doesn’t support PoE and can use only the supplied adaptor.) When connected to a

PoE complaint LAN port, the IP Phone derives power from the port. If the LAN port does not

support PoE, use the AC/DC adaptor, available separately, for connection to power. The

handset connects to the base with the supplied standard handset coiled cord. Use the chart

below to make connections to the IP Phone.

Figure 2.1-1 IP Phone Connections

Wiring Chart

1 LAN Connect the IP Phone LAN port to the LAN wall jack with the provided LAN

cable.

2 PC Connect the IP Phone PC port to your desktop PC with an RJ-45 terminated

UTP-5 cable.