Specifications

LIP-8002/8002A
iPECS Installer Guide
101
download. The phone first requests the file “mac address”/IP_8002_VER_SIP2, if not found,
the file IP_8002_VER_SIP2 is requested. The phone compares the software version identified
in the file with the version in the phone. If different, the files identified in the version file are
downloaded. Typically, the files required for download include the main firmware file and an xml
file but may include other files as needed for the upgrade. These files along with the version file
are available from LG-Ericsson. If desired, comments may be added to the version file using “#”
as the leading character of the comment line.
If the software download is required, after completion of the download cycle the IP Phone
reboots.
SIP Server Check-in Request
Upon receipt of a SIP check-in or resync request from the SIP server (Notify check sync event
message), the IP Phone initiates the reboot process. The phone must be idle to initiate
provisioning, if busy, upon return to idle, the process starts. During the process, the IP Phone
downloads any configuration file changes as well as new software regardless of the settings for
the software and configuration download flags.