Specifications

LIP-8002/8002A
iPECS Installer Guide
22
3.5.1.7 Registration Status
The status of the line registration with the SIP call server can be viewed. The status is
displayed as OK, NOK (Not OK) or undefined. The latter displays when no call server address
is assigned.
To view the Registration status for a line:
 Press the Settings (
) button.
 Press the
digit, or move the cursor to 2.SIP Configuration using the navigation buttons
and press the OK button.
 Press the
digit, or move the cursor to 1.Line Configuration using the navigation buttons
and press the OK button.
 Press the
button, or move the cursor to 7.Reg. Status using the navigation buttons, view
the registration status.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
3.5.2 SIP Configuration, General Parameters
Parameters in this section assign the overall SIP operation.
3.5.2.1 Outbound Proxy Address
With the Outbound Proxy Address defined, the IP Phone sends all requests to the proxy instead
of the SIP call server configured in section 3.5.1.1
. The address may be in the form of an IP
address or a FQDN.
To assign an Outbound Proxy Address
 Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure. Refer
to section 3.3
.
 Press the
digit, or move the cursor to 2.SIP Configuration using the navigation buttons
and press the OK button.
 Press the
digit, or move the cursor to 2.Outbound Proxy Addr. using the navigation
buttons and press the OK button.
 Input the Outbound Proxy Address using the dial pad and press the OK button to save your
entry.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
Changing the Outbound Proxy Address requires a reboot of the IP Phone; when you
leave the menu, you will receive a reboot notice. The IP Phone must reboot to utilize
the new values entered.
To enter alphanumeric characters select the Mode button. Refer to Appendix E
for the
character mapping of dial pad digits.