Specifications

LIP-8002/8002A
iPECS Installer Guide
35
3.6.6.3.2 Username
In some cases, the HTTP/HTTPS server requires a Username (Id) and Password for
authentication prior to allowing file access.
To set the Username:
 Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure. Refer
to section 3.3
.
 Press the
digit, or move the cursor to 3.Phone Settings using the navigation buttons and
press the OK button.
 Press the
digit, or move the cursor to 6.S/W Update using the navigation buttons and
press the OK button.
 Press the
digit, or move the cursor to 3.HTTPS Provisioning using the navigation
buttons and press the OK button.
 Press the
digit, or move the cursor to 2.Username using the navigation buttons and
press the OK button.
 Input the Username using the dial pad, and press the OK button to save your entry.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
Changing the Username requires a reboot of the IP Phone; when you leave the menu,
you will receive a reboot notice. The IP Phone must reboot to utilize the new values
entered.
To enter alphanumeric characters select the Mode button. Refer to Appendix E
for the
character mapping of dial pad digits.
3.6.6.3.3 Password
In some cases, the HTTP/HTTPS server requires a Username
(Id) and Password for
authentication prior to allowing file access.
To set the Password:
 Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure. Refer
to section 3.3
.
 Press the
digit, or move the cursor to 3.Phone Settings using the navigation buttons and
press the OK button.
 Press the
digit, or move the cursor to 6.S/W Update using the navigation buttons and
press the OK button.
 Press the
digit, or move the cursor to 3.HTTPS Provisioning using the navigation
buttons and press the OK button.
 Press the
digit, or move the cursor to 3.Password using the navigation buttons and
press the OK button.
 Input the Password using the dial pad, and press the OK button to save your entry.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.